Casting from Windows with MT Caster
MT Caster is a small Windows program that shares a screen, a window or an area of a screen to the wall. Visitors download it from MultiTaction's MT Caster downloads page, and can do so ahead of time. A wall without internet offers its own copy instead.
What the wall computer needs
The wall must have a hardware H.264 decoder: an NVIDIA, Intel or AMD graphics card with video decoding. MT Caster sends H.264 only. On a wall without a hardware decoder, the card leaves MT Caster out. Browsers still work there, because they fall back to VP8.
Get MT Caster
The card's 2. MT Caster column (under it: "Windows") shows where to get it, as a link and a QR code that downloads MT Caster, with the line "Download MT Caster, open it and enter the join code."
- The wall has internet. The link and the QR code lead straight to the newest MT Caster file on apps.multitaction.com, printed as
apps.multitaction.com/caster. This is the usual way. Visitors can also download MT Caster before they come, from the same link or the MT Caster downloads page, and one copy works with every wall. - The wall has no internet. The card shows the wall's own address instead,
https://<wall>:8730/get, and the wall serves its copy of MT Caster. A copy downloaded this way already knows which wall it came from: its file name carries the wall's address.
The wall checks every 10 minutes whether it can reach that download, and changes the card to match. Either way, save the file and run it. MT Caster installs itself for the current user and needs no administrator rights.
You can also open the wall's join page at /j. It offers the same MT Caster download as the card. See Casting from a browser.
Pair and share
- Start MT Caster. It runs from the tray, at the right of the Windows taskbar.
-
In the Connect to a wall window, type the join code shown on the card. The join code is six characters, in any case. MT Caster finds the room on the network by itself: every wall announces its room, and MT Caster asks each one whether the code is its own. If two rooms match, it lists them by name and you pick one. A copy from the wall's own
/getlink checks that wall directly. To open the window again, choose Connect to a wall in the tray menu.If MT Caster says "No room on this network has that join code", check the code on the wall and that the laptop is on the same network as the room. On networks that block room discovery, use Enter the wall's address in the same window and type the address from the wall's join page. See Troubleshooting. 3. Choose what to share: a whole screen, one window or an area of a screen. 4. MT Caster connects and the wall shows your picture.
Use the tray menu to:
- Connect to a wall to pair with another wall;
- Change what I share to switch between a screen, a window and an area;
- Stop sharing;
- Share sound to send the laptop's sound with the picture (from MT Caster 0.9.1 with MT Screencast 0.9.6; on by default, and you can switch it during a share). The wall starts muted until someone in the room unmutes MT Cast. If the laptop has no sound output MT Caster can capture, it shares the picture only and says so;
- About MT Caster for the version and the third-party licences;
- Quit.
About the join code
- A join code works once. After someone uses it, the wall shows a new one.
- A code also expires after 15 minutes.
- After five wrong tries in a minute, a device must wait before it tries again.
- Many wrong tries in total make the wall change its code.
Updating MT Caster from the wall
From version 0.9.8, MT Caster updates itself from the wall. When a wall you connect to has a newer MT Caster, MT Caster shows a notification in the tray and a menu item Update MT Caster to followed by the new version number. Choose the menu item, or click the notification and answer Yes (from 0.9.9). MT Caster downloads the new version from that wall, checks it against the wall's SHA-256 checksum and MT Caster's signature, and restarts as the new version. From 0.9.9 it then shows MT Caster updated to followed by the new version, and About shows the full version including the build number.
- It never updates during a share or while the connect window is open, and never installs an older version.
- If the check fails (for example on a PC that cannot verify the signature offline), MT Caster says so: download MT Caster from the wall's join page instead.
- Versions before 0.9.8 cannot update themselves: download 0.9.8 or later once from the card or the join page.
Picture quality
The wall tells MT Caster how much to send, by its cast resolution: up to the wall's picture size (1920x1080, 2560x1440 or 3840x2160) and bitrate. It starts at that bitrate and sends less when the network drops packets. If the picture is poor, see Troubleshooting.
Remove MT Caster
Open Apps and features in Windows and remove MT Caster.