Video inputs
The video inputs feature enables you to display the screen of your laptop, or any other supported device, on the canvas. This section describes how to set up screen sharing.
Canvus supports four categories of video inputs:
- USB video devices: webcams connected directly to the application computer.
- Hardware video capture devices: HDMI/DVI capture cards (Magewell on both platforms; DataPath Vision on Windows) connecting laptops, streaming devices, and AV equipment.
- IP / network streams: RTSP, HTTP, RTP, and UDP video streams from IP cameras and network video sources.
- NDI sources: NDI video streams on the local network (from Canvus 26.09.4).
Canvus can display any incoming video source. For example, webcams, laptops or desktop computers, tablets or personal devices, video conferencing devices, and IP cameras.
Sharing a screen by cable or through a wireless presentation system into a capture card needs no software on the shared device. It works with any device that has a video output, whatever its operating system: Windows, macOS, Linux, ChromeOS, iOS or Android. Only Remote touch, which lets the wall operate a shared computer by touch, needs software on the device, and it is available for Windows computers only.
IP / network streams
Canvus can display video from IP cameras and any network-accessible video source using standard streaming protocols, including RTSP, HTTP, RTP, and UDP. This makes it straightforward to add a ceiling-mounted IP camera, a network video recorder output, or any RTSP-capable camera to a canvas without running a physical cable to the application computer.
IP streams are added and managed using the Video Streams feature. See Video Streams for full instructions, including how to add a stream URL, switch between streams, and the WebRTC delivery improvements introduced in 26.4.0.
NDI sources
From Canvus 26.09.4, NDI streams on the network appear in the video inputs menu next to webcams and capture cards. Each source is listed by the name the sending machine publishes. An NDI source is a live stream, so it has no timeline to seek.
When an NDI source is listed, the video inputs menu shows the line "NDI® is a registered trademark of Vizrt NDI AB". The same attribution is in the About box.
Share a laptop screen over the network with NDI
A laptop or desktop on the same network can share its screen with the wall as an NDI source, with no cable and no capture card. The free NDI Tools from NDI provide the sender:
| Computer | NDI tool | What it sends |
|---|---|---|
| Windows | Screen Capture, or Screen Capture HX for GPU-accelerated, compressed capture | The whole desktop or a chosen region |
| macOS | Scan Converter. Allow it under System Settings > Privacy & Security > Screen & System Audio Recording | The whole desktop or a single application |
- Install NDI Tools on the computer from https://ndi.video/tools/, and start the tool for its operating system.
- On the wall, open the video inputs menu. The computer is listed by the name the tool publishes, usually the computer's name followed by the tool's name in brackets.
- Select it. The screen opens as a video window on the canvas.
Things to know:
- Network. The computer and the wall computer must be on the same local network, and NDI discovery must reach the wall computer. A wired gigabit connection gives the smoothest picture; Wi-Fi works with more delay. On an Ubuntu wall computer,
avahi-daemonmust be running. - Audio. NDI carries the computer's sound. The input starts muted, like every video input; see Share your screen.
- Touch on the shared computer. To operate the computer from the wall, plug a SANDER touch bridge into it and connect SANDER to the input's remote touch port, as in Set up touch control. SANDER works with any operating system. Remote touch is the software alternative for Windows.
DataPath Vision capture cards (Windows only)
On Windows, Canvus supports DataPath Vision HDMI capture cards via the RGBEasy driver interface. Confirmed supported hardware includes the VisionSC-HD4+ family. Other DataPath Vision cards that expose the standard RGBEasy API should also work, but only the VisionSC-HD4+ has been verified in the Canvus codebase.
DataPath Vision support is Windows-only. The RGBEasy library (rgbeasy) is not included in Linux builds.
Magewell capture card setup in 26.4.0
If your video capture card is a Magewell device, Canvus client 26.4.0 ships with improved handling of the Magewell support library (LibMWCapture.dll) and the MW Capture Runtime installer:
- No more silent registration failures.
LibMWCapture.dllis now bundled directly in the Canvus installer, replacing the previousRegSvr32-based step that could fail silently on some machines. - Fewer error dialogs during install. The Magewell runtime installer no longer surfaces spurious
RegSvr32errors on Canvus client install or uninstall. - Cleaner reinstall flow. Reinstalling the Canvus client over an existing installation now handles the MW Capture Runtime correctly instead of leaving the system in a half-upgraded state.
- Runtime downloaded on demand. Instead of carrying the full Magewell SDK zip inside every Canvus installer, the installer now fetches the Magewell runtime executable when required.
For operators, the practical effect is: fewer prompts and dialogs during Canvus installation on machines with Magewell hardware, and no need to run a separate Magewell installer to register the capture library by hand.
Video input connection methods
Before you can share a device's screen with Canvus, you must set up a video connection between your device and Canvus. Most video sources must be connected to the video capture card on your application computer, but webcams must be connected to a USB port.
Webcams
Connect the webcam to any USB port on the computer running Canvus client. Canvus automatically detects the incoming video stream from the webcam.
Laptops or personal computers
You will need to connect the laptop or desktop computer to an input on the video capture card installed on the Canvus application computer. You can use a cable or wireless connection.
- Cable connection: Connect the video output on your laptop or personal computer to a video input on the capture card.
- Wireless connection: Connect the base unit of your wireless screen sharing device to the video capture and then connect your laptop or desktop computer to the base unit. You can use devices such as Barco ClickShare, Apple TV, Google Chromecast, etc.
Tablets or smart phones
First, you must connect your tablet or mobile phone to a streaming device such as Apple TV or Google Chromecast. Next, you connect the HDMI output on the streaming device to a video input on the capture card. You will need to use a suitable adapter or converter cable if your capture card only has DVI inputs.
Share your screen
To share your device's screen with Canvus:
-
Connect your device to Canvus; see video-input-connections.
Canvus automatically detects the incoming video stream and adds your device to the video inputs menu.
-
Open the video inputs menu.
-
When the menu opens, select your device.
-
Canvus adds a video widget for the device to the canvas.
Video inputs, including NDI sources, start muted. To hear one, select it and tap the mute button at its bottom-right corner. To have inputs open with sound, an administrator sets screenshare-audio=true in the [video] section of mt-canvus.ini. See the configuration file reference.
To operate a shared Windows computer by touch from the wall, see Remote touch.
Rename a video input
Canvus lists each video input by the name the device reports. If no name is available, it uses "Video Input" followed by a number. You can give a device a clearer name in mt-canvus.ini with a [video-input:<device>] section:
[video-input:video0]
name=Front camera
The name appears in the video inputs menu and as the title of video widgets created from that input.
On Linux, <device> is the V4L2 device name without the /dev/ prefix, for example video0 for /dev/video0. To find the device name and the name the device reports, run:
for d in /sys/class/video4linux/*; do echo "$(basename "$d"): $(cat "$d/name")"; done
On Windows, <device> is the full device string that Canvus uses for the input. It starts with video=. Canvus writes it to its log when it detects the device, in a line like this:
Detected video capture source video=HD Pro Webcam C920 [video=@device_pnp_\\?\usb#vid_046d&pid_082d&mi_00#<instance>#{65e8773d-8f56-11d0-a3b9-00a0c9223196}\global], 1920x1080
Copy the text inside the square brackets, exactly as it appears in your log, into the section name:
[video-input:video=@device_pnp_\\?\usb#vid_046d&pid_082d&mi_00#<instance>#{65e8773d-8f56-11d0-a3b9-00a0c9223196}\global]
name=Front camera
On Windows the section sets only the name users see.
Note
From Canvus 26.4.1, the section name has no /dev/ prefix. A section written with the prefix, such as [video-input:/dev/video0], is not recognised. Rename it to [video-input:video0].
See the configuration file reference for the other video settings.