Casting from a browser
Visitors can share a screen, window or tab from Chrome, Edge or Firefox. They install nothing.
Browsers allow screen capture only on a secure page. The wall must serve its join page over HTTPS.
Turn it on
Browser share is on by default from MT Screencast 0.9: [web] https=true, [webrtc] enabled=true and [web] listen=lan are the defaults. With no certificate set, the wall makes its own, and browsers show a certificate warning once. To avoid the warning, see HTTPS and certificates.
A wall that was installed before 0.9 keeps the setting it had, because upgrades do not change the settings file. If its card has no Browser column, set this in companion.ini (see Settings):
[web]
https=true
The card's Browser column (under it: "Any laptop") shows the join page address and its own QR code. The QR code opens the join page with the join code already filled in. When MT Caster is switched off, the join code is shown in this column too.
Share from a browser
- Scan the browser QR code on the card with the laptop, or open the address shown under it,
https://<wall>:8730/j. The page is titled "Share to" and the room name. A phone that scans the code is told to open the page on a laptop, because phone browsers cannot share a screen. - If the browser warns about the certificate, choose Advanced, then Proceed or Continue. You see this once per browser when the wall uses its own certificate.
- If you opened the address by hand, type the six-character join code from the card. From the QR code it is already filled in. The code travels in the part of the address after
#, which browsers never send to the wall, so it does not end up in any log. - Choose Share from this browser.
- Pick the screen, window or tab in the browser's own dialog. For sound (from MT Screencast 0.9.6), pick a tab and leave Also share tab audio on, or on Windows pick Entire screen and turn on Also share system audio. This works in Chrome and Edge; Firefox and Safari share the picture only.
The page says whether the share has sound. The wall starts muted until someone in the room unmutes MT Cast.
To stop, choose Stop sharing on the page.
The same page has a Download MT Caster section for Windows laptops.
If a share loses its connection, for example in a Wi-Fi blip, the wall resumes it for up to 30 seconds.
On a wall with a hardware H.264 decoder, browsers send H.264. Otherwise they fall back to VP8.
Browsers
MultiTaction checked a wall with its own certificate on Windows 11. After the one-time click-through, these browsers shared the screen to the wall.
- Chrome
- Edge
- Firefox
Safari on macOS is not checked yet. Mac users can cast with AirPlay.
If the page says it needs HTTPS
The wall is serving plain HTTP. Set https=true in the [web] section. If the visitor opened an http:// address, they should use the https:// one.