Supported VC systems
The wall is the VC system's only screen and its touch controller. The VC system needs no Tap, touch panel or separate screen. It only has to accept a USB touchscreen on its HDMI output and show its call controls there. SANDER presents itself as a standard USB touchscreen, so the VC system needs no driver for it.
Makers call the screen a VC system drives its front-of-room display. In this integration, the wall is that display.
The lists below come from each maker's documentation, checked in November 2026. Makers change support between software releases, so check the linked page for your model and software version. Before an installation, test the combination of VC system, capture card and SANDER.
Microsoft Teams Rooms
Teams Rooms on Android shows its call controls on a touch display, so the wall controls the call.
| Platform | Touch control from the wall | Conditions |
|---|---|---|
| Teams Rooms on Android | Yes, for content and call controls | The wall as the only display. With a second display, Microsoft asks you to turn touch controls off. The setting is Enable touch screen controls in the device's configuration profile in the Teams admin center. |
Teams Rooms on Android runs on the video bars and systems of several makers. The Neat, Logitech and Cisco models below support it. For any other Teams Rooms on Android device, check that its maker lists a USB touch display.
Sources: Microsoft Teams Rooms planning guidance, Teams devices feature comparison.
Zoom Rooms
| Platform | Touch control from the wall | Conditions |
|---|---|---|
| Zoom Rooms on a Windows computer (Zoom Rooms for Touch) | Yes | One touch display, plus up to two displays without touch. When Zoom Rooms asks, choose Use This as The Touch Screen Display on the display that shows on the wall. |
Zoom Rooms appliances: the Neat and Logitech models below support a USB touch display in Zoom Rooms.
Sources: Getting started with Zoom Rooms for Touch, Using multiple monitors with Zoom Rooms for Touch.
Neat
| Model | Touch control from the wall | Content input | Conditions |
|---|---|---|---|
| Neat Bar | Yes | Check with Neat | The Bar has one USB-C port. A touchscreen and USB passthrough for a guest laptop cannot share it. Use a USB-C to USB-A adapter for SANDER. |
| Neat Bar Pro | Yes | 1080p | |
| Neat Bar (2nd generation) | Yes | Check with Neat |
Source: Neat USB connectivity and BYOD mode, Neat Bar FAQ.
Logitech
Logitech's video bars run Teams Rooms on Android or Zoom Rooms in appliance mode (CollabOS). Each one lists a touch screen display as supported on both platforms.
| Model | Touch control from the wall | Content input |
|---|---|---|
| Rally Bar 2 | Yes | HDMI, up to 4K at 60 Hz |
| Rally Bar | Yes | HDMI, 1080p at 60 Hz |
| Rally Bar Mini | Yes | Check with Logitech |
| Rally Bar Huddle | Yes | Check with Logitech |
| RoomMate | Yes | Check with Logitech |
Conditions:
- In the device's display settings, assign the touch input to the HDMI output that goes to the wall.
- With a Tap or Tap IP touch controller connected, Teams Rooms on Android does not show the touch controls on the wall by itself. Turn them on in the device's Teams settings, or leave the Tap out: the wall replaces it.
Sources: Supported Teams Rooms on Android features on CollabOS, Supported Zoom Rooms features on CollabOS, CollabOS display settings, Rally Bar 2 specifications, Rally Bar specifications.
Cisco
Cisco supports third-party touchscreens on these RoomOS devices. The touchscreen gets the same interface as a Cisco Board.
| Model | Touch control from the wall | Content input |
|---|---|---|
| Room Bar Pro | Yes | HDMI, up to 3840 x 2160 at 30 fps, 1080p at 60 fps |
| Codec EQ (Room Kit EQ, Room Kit EQX) | Yes | HDMI, up to 3840 x 2160 at 30 fps, 1080p at 60 fps |
| Codec Pro (Room Kit Pro) | Yes | HDMI, up to 3840 x 2160 at 30 fps on the Room Kit Pro G2 |
Conditions:
- Connect SANDER to a USB-A port. The VC system sends its touch interface to HDMI output connector 1, so connect that output to the capture card.
- Cisco lists a Room Navigator as required for Room Bar Pro, Codec EQ and Codec Pro, also with a touchscreen.
- In Microsoft Teams Rooms mode, Cisco supports one touchscreen.
Sources: Third-party touchscreen support for Room Series devices, Room Bar Pro data sheet, Room Kit EQ data sheet, Room Kit Pro G2 data sheet.
Content input resolution
The content input decides the resolution of what you share from the wall. Set the wall computer's spare output to a mode the content input accepts: 3840 x 2160 at 30 Hz for a Cisco codec, for example, or 1920 x 1080 at 60 Hz for a VC system that takes 1080p. See Connect the hardware.